SOUND ATTENUATOR
1- Circular Sound Attenuator
CSA, CSAP Type
CSA is a circular sound attenuator for use in ductwork.
The outer casing and perforated inner duct of CSA type circular silencers are galvanised sheet steel.
The non-combustible acoustic material is available in insulation thicknesses of 50 mm or 100 mm.
Type CSAP attenuators are the same as the type CSA models, but have an additional sound-absorbing pod for higher insertion loss.
The sound-absorbing pod fitted in the centre has a galvanised, perforated sheet covering and a coned end to reduce pressure drop
CSA, CSAP Type
CSA is a circular sound attenuator for use in ductwork.
The outer casing and perforated inner duct of CSA type circular silencers are galvanised sheet steel.
The non-combustible acoustic material is available in insulation thicknesses of 50 mm or 100 mm.
Type CSAP attenuators are the same as the type CSA models, but have an additional sound-absorbing pod for higher insertion loss.
The sound-absorbing pod fitted in the centre has a galvanised, perforated sheet covering and a coned end to reduce pressure drop
Copyright © MYTR BAZAAR 2000-2011. All rights reserved
PRODUCTS
Nominal Sizes : 250, 315, 400, 450, 500, 560, 630,
710, 800, 900 and 1000
Length : 500, 100 and 1500 mm
710, 800, 900 and 1000
Length : 500, 100 and 1500 mm
2- Rectangular Splitter Attenuator
RSA, RSAP Type
RSA and RSAP are a rectangular sound attenuator splitters for installation in rectangular ducting.
The attenuator is made from galvanised steel. Splitter thicknesses are 200 mm or 300 mm.
RSA models are completely equipped with attenuation material
RSAP models half surface are equipped with galvanized steel.
The splitters are delivered as individually or as mounted in a flunged duct. Duct widths are available from 600 mm to 2400 mm (100 mm increments), and in lengths of 640, 1240, 1500, 1880 and 2480 mm. 1880 mm and 2480 mm systems are delivered as two-piece units.
RSA, RSAP Type
RSA and RSAP are a rectangular sound attenuator splitters for installation in rectangular ducting.
The attenuator is made from galvanised steel. Splitter thicknesses are 200 mm or 300 mm.
RSA models are completely equipped with attenuation material
RSAP models half surface are equipped with galvanized steel.
The splitters are delivered as individually or as mounted in a flunged duct. Duct widths are available from 600 mm to 2400 mm (100 mm increments), and in lengths of 640, 1240, 1500, 1880 and 2480 mm. 1880 mm and 2480 mm systems are delivered as two-piece units.
CSA Type
CSAP Type
RSA Type
RSAP Type
High quality
in work and life...
High productivity
in work environment...
in work and life...
High productivity
in work environment...
High quality
in work and life...
High productivity
in work environment...
in work and life...
High productivity
in work environment...
